The inobtrusive, minimalist Lithonia LDN3 is the most cost-effective small aperture commercial downlighting solution on the market designed specifically for uniform, general illumination. 

Family includes round & square downlights both open and wallwash as well as cylinders. Key Features

• Up to 1500lm delivered and 550 cutoff, LDN3 allows for a quiet, glare-free ceiling
• 1.0 Spacing/Mounting Height ratio provides general illumination performance
• Open wallwash kicker design provides a complimentary asymmetric washlight distribution
• Install-from-below design is standard for downlights with new construction and ICAT options available.
• Surface, cord, wall, and pendant mount configurations available for Cylinders
• Available with nLight® networked controls
• A+ compatible solution

The inobtrusive, minimalist Lithonia LDN3 is the most cost-effective small aperture commercial downlighting solution on the market designed specifically for uniform, general illumination

• Up to 1000lm delivered and 550 cutoff, LDN3 allows for a quiet, glare-free ceiling 
• 1.0 Spacing/Mounting Height ratio provides general illumination performance 
• Open wallwash kicker design provides a complimentary asymmetric washlight distribution 
• Install-from-below design is standard for downlights with new construction and ICAT options available 
• A+ compatible solution 
• Available with nLight® networked controls

LDN8 Cylinders are the most powerful downlight cylinder on the market delivering up to 20,000lm, comparable to high wattage HID. This is the perfect solution for high ceiling plane applications desiring uniform, general illumination from a cost-effective fixture.

Recessed incandescent housing for 2x8 new construction rated IC and Non-IC. Approved for direct burial in insulation. Not for pulling wires.

Construction Air-tight, aluminum housing with engineering-grade thermoplastic frame and junction box with four built-in ROMEX® clamps and ground wire. Pre-assembled poke-home connectors for ease of wiring. Rated for 90°C. Factory-installed captive bar hangers that span up to 24 o.c. and feature stepped shank nail with integral T-bar locks. Two locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position. Trim retention (clips): Retaining clips riveted to top of reflector hold trim inside housing. Trim retention (TOR option): Two side-mounted torsion springs on the trim and two receiving brackets in the can, ensure a consistently tight fit with the ceiling. Suitable for ceilings up to 1-1/2" thick.

Recessed incandescent housing for 2x6 new construction. Approved for direct burial in insulation. Not for pulling wires. 

Construction Air-tight, aluminum housing with engineering-grade thermoplastic frame and junction box with four built-in ROMEX® clamps and ground wire. Pre-assembled poke-home connectors for ease of wiring. Rated for 90°C. Factory-installed captive bar hangers that span up to 24 o.c. and feature stepped shank nail with integral T-bar locks. Two locking screws hold fixture position. Socket clips to trim to ensure proper and consistent lamp position. Trim retention (clips): Retaining clips riveted to top of reflector hold trim inside housing. Trim retention (TOR): Two side-mounted torsion springs on the trim and two receiving brackets in the can, ensure a consistently tight fit with the ceiling. Suitable for ceilings up to 1-1/2" thick.

IC-rated, Lithonia OneUp™ direct-wire downlights feature a unique “canless” design. These all-in-one LED fixtures include an integrated junction box for direct wiring, require no tools (other than a hole saw for your ceiling cutout) and take less than 1/3 of the time to install versus a conventional incandescent can.

IC-rated, Lithonia OneUp™ direct-wire downlights feature a unique “canless” design. These all-in-one LED fixtures include an integrated junction box for direct wiring, require no tools (other than a hole saw for your ceiling cutout) and take less than 1/3 of the time to install versus a conventional incandescent can.

IC-rated, Lithonia OneUp™ direct-wire downlights feature a unique “canless” design. These all-in-one LED fixtures include an integrated junction box for direct wiring, require no tools (other than a hole saw for your ceiling cutout) and take less than 1/3 of the time to install versus a conventional incandescent can.